+86-15851675955
Home » Products » Loading Bay Equipment » Edge Manual Dock Leveler

Product Category

Contact Us

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Edge Manual Dock Leveler

Availability:
Quantity:

The loading and unloading platform is the best solution to adjust the height difference between the platform and the carriage.

There are manual mechanical type, electro-hydraulic type. The operation is simple, the height can be adjusted arbitrarily, the adjustment range is large, the loading and unloading efficiency is improved, and the manpower is saved. Applicable places: large enterprises with frequent loading and unloading vehicles and different vehicle models, warehouses, stations, docks, warehouse logistics bases, postal transportation, logistics distribution, etc.


Manual loading and unloading platform

1. The most economical loading and unloading platform, manually operated, is used for occasions where the loading and unloading heights are approximately the same.


2. The installation is simple and convenient, and it can even be directly installed on the existing platform. The construction is simple and the installation is rapid, suitable for the renovation project.


Standard size:W1500*L700 ,W1800*L700 ,W2000* L700

Maximum slope of working range 12.5%

Positive height difference 100 mm,

Negative height difference 150 mm

Bracket depth MRS: 435 mm, without crash block

Loading capacity:3000kg.


Hydraulic loading and unloading platforms are divided into folding plate type and telescopic type. The maximum length can reach 5 meters, between the platform and the freight car

It can also be easily connected when there is a large height difference.


Hydraulic folding plate loading and unloading platform

The most widely used model.

Driven by the hydraulic system, the platform rises to the highest point, and then the lip automatically folds outward. The platform fell slowly, until it fell on the carriage board, and the overlap was completed. At this point, the forklift can quickly and safely enter and exit the truck for loading and unloading.


Loading capacity and Type Selection

Dynamic   load

Panel   thickness

Panel   reinforcement

Thickness   of mouth plate

Base   frame

Static   load

Use   forklift range

5tons

6mm

4mmL   steel

12mm

60   channel steel

8 tons

2.5   tons plug-in

8tons

8mm

4mmL   steel

16mm

100   channel steel

11tons

3.5   tons plug-in

10tons

8mm

14 #   I-beam

16mm

100   channel steel

13tons

5 tons   plug-in

14tons

10mm

16#   I-beam

16mm

100   channel steel

17tons

6 tons   plug-in


Option:

Mechanical dock leveler.(Special for the Chemical industry ,flammable and explosive areas .)

1.No electric parts .

Air bag dock leveler.(Special for the high requirement of the cleanness and hygiene area. )

2.No oil leakage ,avoid the pollution of the indoor environment,great improve the loading bay cleanness and improve the working environment .


Hydraulic telescopic loading and unloading platform


The telescopic lip plate is 0.5-1.2m, which is most suitable for the cold chain loading and unloading area, or the loading and unloading platform with thermal insulation requirements. The super long overlapping lip plate can make the platform installed behind the thermal insulation sliding door, and keep the cold chain section in the cold chain transportation process, which greatly saves energy.

The telescopic and lifting strokes of the lip plate of the telescopic loading and unloading platform are continuously adjustable, with an accuracy of up to 1cm, which is suitable for loading and unloading vehicles full of goods. Even if the rear of the freight car has been filled with pallets, leaving only little lap space for the platform lip, the loading can be completed normally.


Loading capacity and selection.

Dynamic   load

Panel   thickness

Panel   reinforcement

Thickness   of mouth plate

Base   frame

Static   load

Use   forklift range


6tons

6mm

4mmL   steel

12mm

60   channel steel

8tons

2.5   tons plug-in

8tons

8mm

4mmL   steel

16mm

100   channels

11tons

3.5   ton plug-in

10tons

8mm

14 #   I-beam

16mm

100   channels

13tons

4.5   tons plug-in

15tons

8mm

14 #   I-beam

16mm

100   channels

18tons

6.7tons   plug-in


The door seal is the best solution to achieve a perfect seal between the loading and unloading port and the carriage.

Modern logistics or factories have higher and higher requirements on the cleanliness, temperature control of the internal environment of the warehouse and the sealing and thermal insulation during the loading and unloading process. Improve the clean environment inside the plant.


Mechanical door seal

The mechanical door seal can be flexibly adjusted according to the size of the car, suitable for various occasions, and can meet the needs of most customers.

The top and side curtains of good quality are mounted on a retractable galvanized steel frame, which constitutes a stable and durable structure that is flexible and flexible. It can protect the cargo being loaded from wind and rain, save energy expenditure, and avoid gas convection.


1. Flexible size, can adapt to different models with large size difference.


2. The curtain plate and the frame are independent components, which can be easily assembled with bolts. Similarly, replacement and maintenance are also very simple and economical.


3. The flexible and flexible structure does not have high requirements on the strength of the external wall of the building, and the pressure is small, which can be applied to different walls.


Sponge door seal


The fireproof sponge filled inside the sponge door seal has excellent thermal insulation performance, and is especially suitable for low-temperature preservation or freezing loading and unloading ports. It can reduce the heat exchange of cargo circulation and loading and unloading in a limited way, greatly reduce the cooling energy consumption and save energy costs.


1. Suitable for vehicles of uniform size.


2. The interior is filled with fireproof material, the surface layer is PVC fabric with self-extinguishing function, and the sides that are in frictional contact with the vehicle on both sides and the top are equipped with extremely wear-resistant and squeeze-resistant folds, which is safe and durable.


Optional models:

Adjustable sponge door seal

It is suitable for loading and unloading areas with different thermal insulation requirements.


Inflatable door seal.

The adjustable range of the inflatable door seal is very large, which is very suitable for occasions where the size of the truck changes greatly. The inflatable door seal tightly surrounds the freight car compartment, and its excellent sealing effectively prevents cold air from entering the warm room or hot air from entering the cold storage, thereby achieving energy saving. After the loading and unloading is completed, the blower is turned off, and the airbag will quickly and efficiently discharge the gas in the airbag under the action of the counterweight and the built-in tensioning rope. Excellent thermal insulation, sealing, high efficiency and other properties make the inflatable door seal applied to heat preservation and air tight Places with high requirements, such as cold chain logistics, food, pharmaceutical and other industries


1.Applicable to any size car models.


2. Seal the insulation space.

The top and both sides are 42mm thick polyurethane sandwich insulation boards, and the supporting profiles are anodized aluminum alloy profiles, which form a sealed insulation space when loading and unloading.

3. Strong airbag structure.

The airbag adopts its wear-resistant and pressure-resistant blade scraper material, which can withstand high temperature, ultraviolet rays, corrosion, etc.


4. The top and side curtains are made of double-layer polyester fabric fiber with a thickness of 3 mm and UPVC coating on both sides to protect the inflatable airbag. The high-frequency welded inflatable airbag can resist harsh weather and maintain elasticity for a long time.


5. The airbag can be fully opened within 10S, and can be fully retracted within 10S.


Technical Data:

Application location


Power supply:

3-phase 380±10%V,50/60HZ, 0.75kw.

Working tempeture:

-30 ℃-70 ℃.

Air Bag Material:

Highly PVC airtight material; 0.9mm thick

Running Speed :

10 s

Shrinkage:

Top 600-1000mm, Side 600 mm.

Standard size:

W3400*H3600 mm


Previous: 
Next: 
Shanghai Lesho Door Co., Ltd.
Leave a Message
Contact Us

Quick Links

Product Category

Contact Us
Copyright © 2023 Shanghai Lesho Door Co., Ltd. All rights reserved. Privacy Policy | Sitemap | Support By Leadong